Parts & Accessories

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

- Quick Charge USB-to-Micro-USB cable to charge your rechargeable Bontrager lights - Also able to charge most other Micro USB systems - 9 inches/23cm long

Replacement chainstay cover for DuoTrap S Digital Sensor

Are you looking for an incredibly simple way to mount your phone to your bicycle? Do you want that case to have a plethora of mounting options and accessories? Well... look no further than the ElastoKASE from BiKASE. Utilizing the 1/8 turn connection of the GoKASE and the simplicity of a rubber lined, gripping shock cord, the ElastoKASE is your "go to" phone or anything case. • Phone holder for 6-inch phones and smaller • Works with GoKASE attachments and brackets • Material: TPE & Shock Cord

Replacement chainstay cover for DuoTrap S Digital Sensor

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Trip Computer Mount for a clean, flush look that securely holds your Bontrager Trip computer in a perfect position to see on the go. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Insta-Mount or Trip Computer - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr GoPro Mount for a clean, flush look that securely holds your GoPro in a centered location. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for GoPro camera - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet. - Tested with an accelerometer for intended breakaway point if involved in a crash

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin High Mount for a clean, flush look that securely holds your Garmin centered over the stem. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Garmin GPS - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

See and be seen with original equipment lighting accessories. Ensure your lights are always ready to go when you are with this fast-charge USB cable. PRODUCT DETAILS - USB-to-USB-C cable to recharge your Bontrager lights - Compatible with most other USB-C devices - Quick charge - 230mm long

Original replacement battery holder for your Domane MKIV.

Features
- For use with Shimano internal Di2 battery
- For installing a Di2 battery in your bike's seat tube
- Integrates seamlessly with the frame

Specific for Bosch Smart Systems.

Features
- 970mm cable length
- Mounting hardware not included

Original replacement battery cover for your Powerfly.

Features
- Refer to the Service Manual for assembly & service instructions
- Hardware sold separately

The Quad Lock® Bike Mount is the lightest, strongest and most secure smartphone bike mount on the market.

SECURE MOUNTING
Featuring a patented dual-stage lock, you can ride with confidence over bumps and jumps knowing that your smartphone isn’t going anywhere your bike isn’t.

QUICK TO ATTACH / DETACH
Simply twist and lock to view apps such as Strava®, MapmyRide or Apple® maps as you ride. Detach just as easily so you don’t miss a photo opportunity or important phone call.

SLEEK DESIGN
At just 23mm tall and 35mm wide, the Quad Lock® Bike Mount fits seamlessly onto the stem or handlebar of your bike.

WHAT'S INCLUDED
- 1 x Quad Lock® Stem/Handlebar Mount
- 2 x EPDM mounting o-rings (small)
- 2 x EPDM mounting o-rings (large)
- 2 x Nylon zip ties (black)

TECH SPECS
- Suits bar sizes 25-40mm in diameter
- Glass filled nylon / polycarbonate construction
- Stainless steel fasteners
- 23mm tall and 35mm wide
- Compatible with all Quad Lock Cases and Universal Adaptors

Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want. - Limitless remote shifting positions for drop and aero bars - Wired shift buttons can be positioned however the rider prefers - Connect to Blip Box or drop bar eTap levers - Compatible with SRAM RED eTap shift/brake controls

- Di2 internal battery, fits all e-Tube Di2 groups - Capacity: 500 mAH (± 2000km) - Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets - Requires SM-BCR2 charger

The Muc-Off Secure Tag Holder offers a secure way to install a tracker to your bicycle frame using the bottle cage mounting holes, so you can track down your bike in the event of theft and can locate it. Bike thieves can get lost, then found again! Protect your pride and joy with the Muc-Off Tag Holder. Designed to track your bike down in the event of theft from a long-range. At closer range activate the built-in AirTag speaker to help you better locate the tracker and your bike. HIGHLIGHTS: - Compatible with Apple AirTags (purchased separately) - Fits securely under your bottle cage - Supplied with 2x T25 security 25mm bolts and 1x security key - Non-rattle design to hold tracker securely in place - Tracking device not included with mount! What's Included: - Secure Tag Holder made from precision machined 6061 Aluminium - 2x T25 security 25mm bolts - 1x security key Not Included (Sold Separately) - Apple AirTag

The K-EDGE co-polymer insert for Garmin 1/4 Turn style computers is a replaceable item. While it is extremely strong, we designed this insert to fail on a significant impact before the tabs on the back of the Garmin break. - Qty 1 – K-EDGE Co-polymer Insert for Garmin 1/4 Computer (Part No. K13-503) - Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.

The BlueGiga dongle gives Rouvy, CycleOps' virtual training software, the ability to seamlessly connect to Bluetooth devices and sensors. The BlueGiga dongle contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including CycleOps smart indoor bicycle trainers and power meters made by the folks at PowerTap. Most importantly, the BlueGiga dongle is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth dongle for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.

Made in the USA by the bike computer mount experts K-Edge, this Wahoo, Garmin, and GoPro compatible computer mount is made specifically for the ENVE Carbon Road Stem. The ENVE Combo Computer Mount integrates seamlessly with your ENVE Road Stem and opens up the possibility to accessorize your ride with a computer, light, and/or camera combo. This mount is made in the USA by the experts at K-Edge, and is compatible with all available K-Edge accessory mount inserts. FEATURES - Manufactured in the USA by K-Edge - Multiple Computer Mount Options - Multiple Light and Camera Options COMPATIBILITY - Wahoo - Garmin Models: 1030, 1000, 820, 520, 510, 500, 25, 20

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin Low Mount to add a Garmin GPS directly to the Blendr stem mount. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Garmin GPS - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

- CNC Machined Aluminum - Combo Compatible (K13-580 adapter sold separately) - GARMIN approved replaceable computer insert protects computer tabs - Anodized Black with laser etched logos - Payload Capacity: Top 123g / Bottom 242g with combo adapter - Weight- 50g Compatibility: - All Garmin Cycling Computers - Combo (GoPro-style light/camera interface) adapter compatible (K13-580-BLK sold separately)

Shimano EW-SD300 Di2 eTube Wire for external routing is available in a variety of lengths.

Compact design makes new electric components smaller and lighter

EP8 EP800 Series

Bontrager's DuoTrap Digital Speed/Cadence Sensor pulls double duty for your ANT+ cycling computer. It wirelessly transmits speed and cadence data and fits directly into the chainstay of certain Trek bicycles for a clean look that installs in seconds.

Keep your computer and sensors ready for every ride with replacement batteries Key features: - CR2032 battery is used for most Trek and Bontrager computers - 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor - LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor

Save space in your bicycle's cockpit with our Quad Lock® Stem Cap Mount or Quad Lock® Stem Cap Mount Adjustable. Both securely install between your bicycle's stem and stem cap, offering compatibility with a large variety of stem angles.

SECURE MOUNTING
These are our lightest and strongest bike mounts. Engineered from ultra-light aircraft-grade aluminium, then rigorously tested for unmatched strength and durability. This high-performance material ensures the mounts remain tough without adding unnecessary weight, making them ideal for cyclists who demand strength and efficiency. With our patented dual-stage lock, you can ride confidently, knowing your smartphone will stay secure, even on the roughest terrain.

SLEEK DESIGN
Crafted from premium aircraft-grade CNC-machined aluminium, with black hardware and a compact black lever, our Stem Cap Mounts offer a minimal and lightweight aesthetic. They install seamlessly between your bike's stem and stem cap, ensuring a clean, unobtrusive look.

OPTIMAL VIEWING POSITION
Both mounts feature a dual-sided head design, allowing you to mount the lever head on either side, offering more flexibility in adjusting your optimal phone viewing position on a variety of stem angles.

The Stem Cap Mount Adjustable features a screw-tightened hinge to hold firmly in place in your preferred viewing angle.

QUICK TO ATTACH / DETACH
Simply twist and lock to view apps as you ride such as Ride with GPS®, Strava® or maps. Detach just as easily so you don’t miss a photo opportunity or important call.

WHAT'S INCLUDED
- 1 x Quad Lock® Stem Cap Mount Adjustable (with short black lever and black hardware)
- 1 x Allen (Hex) Key

TECH SPECS
- Black anodized aircraft-grade aluminum, forged by precision CNC
- Assembled with short black lever and black hardware for minimalist design aesthetic
- Suits stem diameters 1 1/8" (28.6mm)
- Fits cleanly above the stem and held securely by the stem cap
- Hinged design, tighten in place with included hex key
- Dual-sided, reversible design. Attach the head to either side of the mount for your optimal setup and phone positioning

Wheel magnet for all CatEye cycle computers

This NiteRider Adapter is sold separately from K-EDGE “Combo Mount." - Precision Machined 6061-T6 Aluminum - Anodized Gunmetal - Converts a NiteRider Rail Interface to adapt K-Edge GoPro Mounting Interface - Enables compatibility with K-Edge GoBig Mounts and Combo Mounts - 2x M4 Mounting bolts with Nylok included - Compatible with Lumina Series, Mako Series - Weight: 11.5 grams

SHIMANO's WU101 wireless unit connects inline to a DI2 E-TUBE system enabling the use and connectivity of ANT+ and Bluetooth LE compatible accessories. It also allows the use of SHIMANO's smartphone and tablet E-TUBE PROJECT software for maintenance and system updates.