Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Fenders

$37.99
The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology.
- High performance dual compound plastic
- Easy quick-release-fastening by pre-adjusted powerstrap
- 2 joints for optimized adjustment to all frames
- Optimized dirt protection
- 27.5+ and 29-inch wheel compatible

$74.99
Accessorize your ride while keeping yourself dry at the same time.
- Front and rear full length fenders designed for use on Townie 26-inch bicycles ONLY
- Fits both men's and ladies' 26-inch Townie models
- Protects against splashes
- WILL NOT FIT Tall Townie Mens Bicycles or 24-inch Townie bicycles

$85.99
The SKS SPEEDROCKER has been specifically developed for compatibility with gravel and adventure bikes, cyclocross bikes and road bikes with tyres exceeding 32mm. Proudly Made in Germany, the Speedrocker offers incredible stability over the roughest tracks while also providing optimum protection in all weathers.
- Rear fender expands for custom fit
- Rubber fasteners mount to a variety of frame styles

$37.99
The Shockblade 27.5+/29-inch is a clip-on front, high-quality 2-component fender for mounting on the fork of 27.5+ and 29-inch mountain and trekking bikes.
- Virtually unbreakable high quality dual compound plastic
- Hidden chuck cone adapter which is fitted once during first assembly
- Easy quick-release fastening
- Optimized dirt protection
- Fits almost all suspension forks
- 27.5+ and 29-inch wheel compatible

$22.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.

$37.99
The Shockblade 26/27.5-inch is a clip on front, high-quality 2-component fender for mounting on the fork of 26-inch and 27.5-inch mountain and trekking bikes.
- Virtually unbreakable high quality dual compound plastic
- Hidden chuck cone adapter which is fitted once during first assembly
- Easy quick-release fastening
- Optimized dirt protection
- Fits almost all suspension forks
- 26-inch and 27.5-inch wheel compatible

$67.98
Ride in any weather
The Bontrager NCS fender is everything you want in a fender. It installs in seconds, is available in a variety of sizes to fit various bikes, and offers full coverage to keep you dry. The no-cut design includes everything you need for easy installation and it even comes with an integrated Blendr rear light mount.
Product details
- Fully assembled fenders that install in minutes
- Integrated rear Blendr light mount for use with Bontrager Flare lights
- No-cut struts allow quick strut adjustment for proper tire clearance
- Double-back strut on rear fender adds support and stability
- Made of lightweight yet super-durable polycarbonate
- Stainless steel hardware resists rust
- Four sizes available to accommodate most bike and tire configurations
$124.99
It's fender season
Our patented "No-Cut-Strut" bicycle fenders allow quick and simple installation to keep you dry and your bike clean. The premium aluminum construction provides added reliability and less vibration, while the sleek adjustable arms allow ultra-precise placement, so you can tailor the fit faster than you can pull a shot of espresso.
Patented No-Cut-Strut alloy fenders provide durability and quick, easy installation.
- Fully assembled fenders that install in minutes with only two tools
- Durable no-cut alloy struts allow quick adjustment for proper tire clearance
- Made of premium aluminum for added durability and reduced flexing and vibration
- Double-back strut on rear fender adds support and stability
- Stainless steel hardware

$49.99
Wet weather is no worry when you've got Electra's Cruiser Essential Aluminum Fenders. They're made from durable, low-maintenance aluminum and offer full coverage so you'll arrive squeaky clean. All mounting hardware is included for quick and easy installation.

$62.99
A fender that is ready when you are
On some rides you want a fender. This Universal Fender is designed for quick and easy installation on road, mountain, gravel, or city bikes so that riding with a fender on any bike can be a game-time decision. The versatile attachment clamp securely mounts tp most seatposts, and the front and rear set are designed to work with tire widths from 700x23 all the way up to 27.5/29 x 2.8.
Product details
- Front and rear fender set fits tire widths from 700x23 to 27.5/29x2.8
- Versatile fender offers simple and effective protection from the elements
- Universal attachment clamp designed to fit most seatposts
- Quick and easy installation or removal

$49.99
Functional. Fashionable. Fenders.
Keep you and your threads clean and dry by adding stylish fenders.
Accessorize your ride and keep yourself dry.
- Front and rear full-length fenders designed for use on Townie Tall bicycles
- Fits Step-Over Townie Original models
- Compatible with tires up to 2.0-inch wide
- Protects against pesky mud and splashes

$64.99
Keep your tail clean
On some rides you want a fender. The Universal Fat Bike Fender is designed to offer quick and easy installation so that riding with a fender can be a game-time decision. The versatile attachment clamp securely mounts to most seatposts, and the front and rear set are designed to work with tire widths from 3.0 to 4.75 inches.
Product details
- Front and rear fender set fits tire widths from 3.0 to 4.75 inches
- Versatile fender offers simple and effective protection from the elements
- Universal attachment clamp designed to fit most seatposts
- Quick and easy installation or removal
- Trim lines on front fender offer customizable shape to fit tires and bike

$74.98 - $74.99
Accessorize your ride while keeping yourself dry at the same time.
- Front and rear full length fenders designed for use on Townie 26" bicycles ONLY
- Fits both men's and ladies' 26" Townie models
- Protects against splashes
- WILL NOT FIT Tall Townie Mens Bicycles or 24" Townie bicycles

$13.99
- Lightest and most versatile MTB mudguard available
- Uses hook and loop Velcro straps to attach to the bridge and lower legs
- Compatible with forward and double bridge fork designs and all wheel sizes

$83.99
Spice up your eBike with an Electra fender set.
- Front and rear full-length fenders designed for use on Townie Path Go! eBikes
- Fits both step-thru and step-over Townie Go! models
- Will not fit other Townie bike models
- Protects against pesky mud and splashes

$129.00 - $139.00
PDW's Full Metal Road Fenders are designed to fit road bikes that are difficult to install full-coverage fenders on. They have special hardware to get around caliper brakes and under forks, even add-on mounts for bikes that lack eyelets to mount fender stays to. They provide full-wrap coverage, even shielding riders behind you from tire spray thanks to the sturdy rubber mudflaps. Plus, safety release tabs ensure your wheels keep turning, even if debris gets lodged between the fender and tire.
- Anodized aluminum
- 30mm wide
- Fits bikes with 700 x 23mm tires and fender eyelets
- 454 grams

$74.99
Accessorize your ride while keeping yourself dry at the same time.
- Front and rear full length fenders designed for use on Cruiser Ladies' 26-inch bicycles
- Protects against splashes
- Fits ONLY Electra Cruiser Men's' 26-inch Bicycles

$93.99
Functional. Fashionable. Fenders.
No one wants that wet stripe on their back.
Keep yourself and your gear clean and dry with a stylish fender.
Fenders intended for warranty and service use.
- Original equipment replacement fenders for Electra bikes
- Color matched for direct compatibility

$67.99
Functional. Fashionable. Fenders.
No one wants that wet stripe on their back.
Keep yourself and your gear clean and dry with a stylish fender.
Fenders intended for warranty and service use.
- Original equipment replacement fenders for Electra bikes
- Color matched for direct compatibility

$83.99
Functional. Fashionable. Fenders.
No one wants that wet stripe on their back.
Keep yourself and your gear clean and dry with a stylish fender.
Fenders intended for warranty and service use.
- Original equipment replacement fenders for Electra bikes
- Color matched for direct compatibility

$83.99
Functional. Fashionable. Fenders.
No one wants that wet stripe on their back.
Keep yourself and your gear clean and dry with a stylish fender.
Fenders intended for warranty and service use.
- Original equipment replacement fenders for Electra bikes
- Color matched for direct compatibility
- Sold in pairs
- Includes struts

$73.99
Functional. Fashionable. Fenders.
No one wants that wet stripe on their back.
Keep yourself and your gear clean and dry with a stylish fender.
Fenders intended for warranty and service use.
- Original equipment replacement fenders for Electra bikes
- Color matched for direct compatibility

$89.99
Fender set with flexible spoiler
It doesn't get any longer than this: The BLUEMELS STYLE mudguard set with a flexible spoiler offers excellent all-around protection against splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the mudguard is extremely robust, rigid, and protected against corrosion.
New V adapter with ESC security system
With its matt black surface and the black fastening components, the BLUEMELS STYLE also leaves nothing to be desired in terms of looks. The newly developed V-adapter with ESC safety system decouples the double U-struts when branches get between the spokes so that the wheel does not lock. Incl. accessories and struts.
- Aluminum/plastic sandwich construction
- With a flexible spoiler
- V-adapter with ESC safety system
- Stable double U-struts
- Made in Germany

$18.00
Portland Design Works has given the original fat bike front fender a facelift! The Mud Shovel 6.5 Front Fender was designed specifically for fat bikes - they're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. Made of heavy-duty polymer, the Mud Shovel 6.5 Front Fender is super lightweight but sturdy enough to take years of bad weather abuse. The fender mounts to the downtube of your bike using adjustable rubber straps for a secure fit.
- Front fender is 254mm wide and 622mm long (10" x 24.5")
- Extra-long, wide design blocks snow, water and sand
- Bracket keeps fender super stable and is easy to install
- Built with lightweight, sturdy materials for durability

$14.99 - $19.99
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess.
- Works on all RockShox fork models
- Comes with 4 zip ties for immediate installation
- Offered in a wide range of colors that match RockShox's fork decal packs
- Designed specifically for RockShox forks
- Deep side skirts protect stanchions and dust seals from rocks and debris
- Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed

$49.99
Add fenders to your bike to show mud and debris who's boss.
Functional. Fashionable. Fenders.
No one wants that wet stripe on their back. Accessorize your ride with some fenders and keep yourself dry while you're at it.
From subtle to chic, there's a pair for everyone.
Product details:
- Includes front and rear full-length fenders
- Designed for use on Cruiser Go! and Townie Go! 7D e-bike models
- Protects against pesky mud and splashes
- Will not fit on other bike models
- Compatible with Electra light kit
- Mounting hardware included
- Mounting location: Front and Rear
- Attachment: Bolt-on
- Material: Aluminum

$26.79
These clip-on fenders are designed specifically for fat bikes. They're extra-long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure.
- Extra-long and wide to accommodate the biggest tires
- Easy to install and fits virtually any bicycle

$63.99 - $69.99
Functional. Fashionable. Fenders.
No one wants that wet stripe on their back.
Keep yourself and your gear clean and dry with a stylish fender.
Fenders intended for warranty and service use.
- Original replacement fenders for Electra Townie bikes
- Color matched for direct compatibility

$67.99
Functional. Fashionable. Fenders.
No one wants that wet stripe on their back.
Keep yourself and your gear clean and dry with a stylish fender.
Fenders intended for warranty and service use.
- Original equipment replacement fenders for Electra bikes
- Color matched for direct compatibility

$26.99
- Smart clip-on front mudguard for road, cyclocross, hybrid, gravel bikes, etc.
- Fits a maximum tyre width up to 38mm.
- It is the ideal companion to our S-BLADE rear mudguard.
- Its smart, double hinged quick release fitting system also fits aero forks.
- Paintwork protection film for the frame is included.
Page 1 of 3
Next page