Thomson's Elite Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.
- Straight-gauge 6061-T6 alloy shaft construction - 2-bolt rocker-head with micro-adjustment - Suitable for road or mountain use
• Aluminum • Coil spring provides plush suspension • Adjustable pre-load design • Micro-adjust seat clamp • 450 grams
Dimension Two-Bolt Seatposts provide a sturdy and durable saddle perch for cross country and all-mountain riding in three diameters, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - 0mm offset
On leg-burning climbs, crazy fast descents and rolling technical terrain, RockShox's Reverb dropper post enables you to attack the trails like never before. Just hit the hydraulic remote lever for 100–125mm of infinitely adjustable up-and-down saddle movement without ever slowing down! The return speed is easily adjustable by turning a dial on the remote while the triple-lipped sealing system and sealed hydraulic hose keep dirt out for clean, consistent operation. There's also an included collar that limits travel to a preferred height setting. So go ahead and drop your seat a couple of inches for that 30-foot technical section, raise it for that long climb then lower it all the way and get back for that steep descent, without losing your flow.
- Aluminum dropper post with titanium bolts, carbon remote, superlight Powercordz cable and carbon lower head clamp - 100, 125 or 150mm drop options with the same air/oil system as the original LEV - Stationary remote cable routing - Housing stop rotates 360 degrees - 100mm drop, 335mm length post - 125mm drop, 385mm length post - 150mm drop, 435mm length post
$26.99 - $33.39
Origin-8's Pro Fit Alloy Seat Post is made of light and durable forged aluminum that's been anodized and laser etched for a custom look. It also features an adjustable 2-bolt clamp that holds fast and lets you easily dial in your seat position. And, this fine post comes in a variety of diameters to fit almost any bike.
The internally routed post uses a mechanical lock to keep the post in place and a low-pressure air spring to return to post to maximum extension. Due to the lack of oil and static seals; the post operates in below-freezing temperatures making it a good choice for fat bikes and cold weather riding. - Hunter Head two-bolt design fits standard and 7 x 9 mm Carbon Rails - Actuation cable easily (and tool-free) disconnected with Quick Connector for easy post removal. Uses standard shifter cable and housing - Extreme changes in temperature may require a user to follow the tool-free brake reset procedure for optimum function - Adjusting the air pressure will change the return speed of the post. 20-40 psi range - Remote sold separately
$339.00 - $429.99
KS's LEV Integra is the only hydraulically locked and air-sprung post to feature zero cable movement and up to six inches of silky smooth travel. Couple that with our patented and unmatched one way roller bearing to ensure miles of play-free movement. Throw in a micro adjustable head, ergonomic carbon fiber remote that replaces an ODI Lock-On inner clamp and LEV is the ultimate dropper to let you keep rhythm on your ride. - Internally routed version of the LEV, specific to bike frames with internal dropper post design - Aluminum dropper with alloy trigger/clamp - 100, 125, or 150mm drop options with the same air/oil system as the original LEV - Locks anywhere in vertical range - Post will not extend when locked
Bontrager's Speed Concept Seatpost lets you get your aero fit dialed. Different offsets allow you to customize your riding position for superior ergonomics and aerodynamics, and the clamp is compatible with both standard and oversize saddle rails. This seatpost is compatible with 2014 Trek Speed Concept 9 Series bikes.
Trek-compatible seat mast cap Offered in white and black and a variety of lengths and offsets, the mast cap includes hardware compatible with round saddle rails only. 7x10mm carbon rail-compatible hardware sold separately. Key features: - Ultra-light carbon construction - One bolt head design offers easy fore-aft and infinite angle adjustment - Compatible with all Trek road bikes with round seat masts - 175mm and 135mm lengths - 5mm and 20mm offsets - Aluminum clamp
Bontrager's Speed Concept Seatpost lets you get your fit dialed before your next triathlon or time trial. It's crafted from OCLV carbon and the one-bolt head provides simple adjustments. Different offsets allow you to customize your riding position for superior ergonomics and aerodynamics.
$19.99 - $23.99
• Forged aluminum • Integrated micro-adjust seat clamp
$399.00 - $399.99
The Reverb Stealth features Vent Valve Technology for super simple service if the need arises. Redesigned internals provide effortless actuation and increased reliability. With reduced overall post lengths and new travel options, riders of all shapes and sizes benefit from more travel than ever before. The new Reverb Stealth redefines what it means to simply go up and down. - Shorter overall post length - Stealth Internal cable routing
A streamlined design with fewer moving parts and better seals makes for a dropper post that performs consistently and requires less maintenance. The updated Bontrager Line Dropper Post is easy to set up and now even easier to service. The cable-actuated hydraulic locking design provides proven functionality for bikes with internal routing. - Remote cable actuation with ergonomically designed under-bar lever - Air-sprung hydraulic locking cartridge offers infinite adjustability within dropping range - Keyed chassis prevents rotation for a stable ride - 2-bolt rocker head with micro adjustment allows for easy saddle tilt adjustment - Internal cable routing keeps housing tucked away and free from moving wheel - Includes cable, housing, and 1x under-bar remote lever - On-Bar Drop Line Universal Lever sold separately - Frame must be compatible with internally routed seatpost routing
Bontrager's Race XXX Lite Seatpost is made of OCLV carbon for a sweet ride and minimal weight. Carbon's unique vibration damping properties smooth the road and the trail so you can go longer and harder. And, this post boasts an easy-to-use, one-bolt, infinitely-adjustable clamp.
- Aerodynamic FACT carbon construction that’s compatible with the 2019 Venge - Sleek Di2 integration hides the Di2 junction box inside - Cylindrical aluminum head assembly adjusts fore/aft and tilt with a single bolt
A replacement seat and saddle for your young rider's Strider balanace bike. Compatible with all Strider bikes that use a 22.2mm seat post.
The new SL-K SBS SB0 seatpost is lighter and stiffer than ever. Using a UD carbon shaft with a bonded alloy head and a sophisticated SBS clamp design, we can achieve what we believe is the finest SL-K seatpost yet. Available with a polymer Di2 battery holder. - UD carbon shaft with bonded alloy head - Forged alloy "SBS" 2-bolt head - Chromoly hardware - 20mm setback - Fits 7mm standard rails and 7x9mm oval rails - 221 grams
Crafted from 2014 aluminum, Specialized's Pro 2 Alloy MTB Seatpost is tough and light. The laid-back, single-bolt adjusting clamp holds fast and makes attaching and positioning the seat a cinch. And, the anodized finish looks great, too.
Page 1 of 1