Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Pickup/RV/Spare-Tire Mount

$199.96
$249.95
20% Off
Carry 2 bikes in the bed of your pick-up truck with no bolting or drilling with this integrated locking fork mount carrier
Features
-Aluminum telescoping bar with SoftGrip™ rubber feet hold carrier on side rails of full size and small pick-up trucks without drilling (compatible with most bedliners)
-3 One-Key lock cylinders included to lock the bikes to the carrier and the carrier to the truck.
-Fits full size and small pick-up beds (compatible with most bed liners)
-Carries 2 bikes. More bikes can be fit with the Bed-Rider Add On Block (#BRLB, sold separately)

$209.95
Protect both your bikes and your pick-up on your next adventure with heavy-duty, adjustable, padded protection.
Features
- Flexible padding adjusts across a wide range of tailgates and large handle opening provides backup camera visibility
- Bikes remain securely in place with integrated bike separation and multiple-position strap anchors
- Bikes and pick-up trucks are protected during transport with heavy-duty vinyl, adjustable padding
- Gear can be stored securely, even while driving, due to the inside-facing mesh pockets
Technical specifications
- Dimensions: 52 x 15.5 x 2.75 inch
- Weight: 5.5-pound

$399.95
Thule's Spare Me rack bolts onto the mount for your spare tire and securely carries two bicycles (total weight up to 75 pounds). It has Thule's Stay-Put cradles that protect your bikes and boasts an anti-sway design to keep your bikes from swinging together or hitting your vehicle. The arms fold down when not in use. An integrated locking cable and locking knob make it easy to secure bikes to the carrier and the carrier to the vehicle.

$41.99
Delta's pre-aligned positioning bike hitch allows for easy fork installation. It features special anti-rust treatment with a tough powder-coat finish. This ultra-rigid 9mm skewer allows you to easily carry your front wheel with a Delta Wheel Hitch or Wheel Holder (each sold separately).
- Pre-aligned positioning for easier fork installation
- Special anti-rust treatment with tough powder-coat finish
- Features patented Delta locking lever
- Base Dimensions 4" x 1.5" x 1.75"
- Mounting Holes 3" center to center
- Ultra-rigid 9mm skewer
- Carry your front wheel with a Delta Wheel Hitch (sold separately)

$209.00 - $225.00
Shuttle Saver
- Our new T2 pad is made to fit any shape of tailgate, and has an adjustable rear camera panel - both RF exclusive, patent pending features. Carry up to 6 bikes with no bike on bike crime with raised bumpers + downtube straps.
Backup Plan
- Exclusive to the T2 is the adjustable rear panel that allows for easy adaptation to any rear camera + handle position.
Shape Shifter
- Six adjustment straps along top edge of the installed pad provide a fit tailored to your tailgate’s shape - even curved!
Just Say No
- To bike on bike crime. The T2 features raised bumpers in the truck box that keep frame downtubes in place and secure, minimizing contact while shuttling.
Specs
- Construction: PVC tarpaulin with micro-brushed inner lining
- Adjustment: Top edge adjustment, camera window adjustment
- Other: Raised bike spacers and padding, hook-and-loop frame straps, lock loop
Bike Capacity
- Mid-Size Truck (Tacoma or similar): 5-bike
- Full-Size Truck (Ford F-150, F-350 or similar): 6-bike

$69.95
Create your own carrying solutions with this fork-mount block.
Features
- Easy to secure the bike to the bike rack with the locking skewer
- Heavy-duty metal construction holds bike securely when mounted to any flat surface
- Bike held stable with 9 mm lockable quick-release fork-mount skewer
- Locks the bike to the bike rack (lock included)
Technical specifications
- Max number of bikes: 1
- Dimensions: 4.5 x 8.5 x 3 in
- Weight: 1.3 lb
- One Key System compatible
- Lockable bike-to-rack

$29.00
We've all had a friend like The Dirtbag at some point in our lives.
He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.

$139.95
Throw your tailgate cover on, cinch it down, load up the bikes and go. There is no easier way to head to the top. With 6 straps, the Large Camo Tailgate Cover can help shuttle your whole crew while protecting your bikes and pickup from dings and scratches.
- Fits most full-size trucks
- Premium padded tailgate protection
- Flap for easy access to tailgate handle
- Six webbing straps for attachment
- Dimensions: 34L x 62W x 19H in / 86.4L x 157.5W x 48.3H cm

$49.95
The RockyMounts HotRod is a do-it-all truck mount for bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.

$109.00
- Fits almost anything with a tailgate.
- Fold-out panel secures the second bike’s tire to keep your tailgate paint safe.
- Top edge adjustment straps provide a fit tailored to your tailgate’s shape.
- Micro-brushed inner lining protects your tailgate.
- Inner-raised bumpers hold bike securely.
- Offset outer blocks hold your CSU to limit wheel movement.
- Downtube straps secure your bike to the pad.
- Includes 2 eBike downtube extension straps.

$42.99
Saris' Trap Fork Mount can be bolted anywhere you need to hold a bike. It secures your bike's fork dropouts with a stout 9-mm quick-release skewer. The Trap is made of powder-coated, light, durable aluminum. A hole in its body allows your bike to be locked with a cable (sold separately).

$112.01
Introducing the DropTop; our next locking bike fork mount that grows upon years of feedback and use. The DropTop utilizes a TPU overmolded shim to allow for both 12mm and 15mm axles to fit without the need for switching shims out. It is based upon the same clamshell design as the DriveShaft series, which allows for easy loading and adapts to minor differences in axle diameter or contouring. The DropTop also includes mounting holes for both horizontal and vertical mounting orientations, it replaces both the DriveShaft HM and DriveShaft Track Mounts.
- The only locking thru-axle track mount for truck and van tracks
- Compatible with 12mm, 15mm, & 20mm thru axles up to 110mm wide (for 20mm, shims must be removed)
- Vertical and horizontal mounting positions
- TPU overmolded shim eliminates the need to switch out shims for 12mm or 15mm axles
- Anti-Theft: TPU surface provides sufficient friction to stop the axle from being removed when DropTop is firmly clamped and locked
- Can fit QR bikes with our 9mm QR with Dummy Axle - sold separately
- Wide mouth opening to easily load your bike and a locking T-Bolt that adjusts for a tighter hold so the thru-axle cannot be removed when locked
- Carries 1 bike, up to 45 lbs
- Lock core, keys, and Track Hardware Included
- For 9x100mm quick release or bolt on axles only, you can use the Dummy Axle with your DropTop.
Fitment Note: Due to the nature of the DropTop clamp not bracing the fork legs outward, there will be play when used with Mavic Speed Release and Specialized 12mm forks with an oversized non threaded fork leg. For those instances, please use a HotRod instead
Fitment Note: DropTop is NOT compatiblle with Lefty fork mount from Cannondale. RockyMounts does not have a compatible mount for Lefty at this time.

$29.00
Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in your 15mm through axle, and you're all set. This mount fits most 15 x 142mm fat bike forks.

Thule's Bed Rider is perfect for carrying bicycles in your truck's bed. It's comprised of a Thule telescoping aluminum crossbar and 2 Thule Low Rider mounts with locking quick releases. The telescoping design lets the Bed Rider fit small to full-size truck beds without drilling, and the Low Rider mounts hold fast keeping your bikes safe and secure. You can also add Low Rider mounts to carry additional bikes.

$31.96
$39.95
20% Off
Thule's versatile Low Rider is a handy bike mount that you can install in your vehicle, pickup truck bed or on virtually any flat surface. It features a sturdy 9mm-diameter quick release to securely support your 2-wheeler by its fork. Made of heavy-duty metal for strength and reliability, the Low Rider boasts a pass-through hole for locking your rig with a cable lock, too.

$19.00
He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.

$209.95
Protect both your bikes and your pick-up on your next adventure with heavy-duty, adjustable, padded protection.
Features
- Flexible padding adjusts across a wide range of tailgates and large handle opening provides backup camera visibility
- Bikes remain securely in place with integrated bike separation and multiple-position strap anchors
- Bikes and pick-up trucks are protected during transport with heavy-duty vinyl, adjustable padding
- Gear can be stored securely, even while driving, due to the inside-facing mesh pockets
Technical specifications
- Dimensions: 59 x 16 x 2.75 inch
- Weight: 6.5-pound
Page 1 of 1