Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

Bontrager Race Lite Clip-On Aerobars S-Bend
$119.99
In the race against the clock, Bontrager's Race Lite Clip-On Aerobars S-Bend give you the advantage you need. Adjustable arm rests and extensions allow you to dial in your profile position so you can comfortably stay in a wind-slicing tuck. And the internal cable routing keeps everything out of the wind, nice and neat.
Delta Stem Raiser
$29.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase - Forged 6061 aluminum - Threaded alloy top cap
KMC MissingLink Connector
$1.98 - $8.55
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
Surly Singleator
$50.00
Turn your geared bike into a singlespeed machine with Surly's Singleator. The Singleator mounts to your derailleur hanger and provides a smooth, quiet and adjustable means of tensioning the excess chain slack on any bike. It's made from strong forged steel and features a triple-sealed spring, large-cog capacity, chain guides, fully-adjustable chain line, floating pulley, and a stainless-steel pivot bushing. And, it works with both BMX and standard chains.
Bontrager Rear Mount Adjustable Kickstand
$24.99
Keep your bike safely upright and at the ready with the Rear Mount Adjustable Kickstand. Adjustable length makes it suitable for bikes with 24-29" wheels and installation is a breeze with all necessary hardware included. - Adjustable length fits bikes with 24-29" wheels - Attaches to the rear of the bike near intersection of seatstay and chainstay - Includes mounting hardware
Bontrager Universal Chainstay Protector
$5.99 - $15.99
- Quiets chain slap and protects chainstays from nicks and scratches - Standard protector fits most chainstays - Universal kits come with circle protectors to eliminate frame damage due to cable rub
Sunlite Dog Leash
A well-exercised dog is a happy dog, so give Fido a good workout while you ride! Sunlite's Dog Leash consists of a metal bar that mounts under the rear axle bolt or quick-release and straps to your chainstay. This keeps the center of gravity low so you stay stable if your dog pulls to one side. The bar is long enough to keep your pup away from the bike, too.
Bontrager Speed Concept Mono Extension
The OCLV Carbon Mono Bar Extension delivers an even more aerodynamic leading edge to Trek's drag-defying Speed Concept (Gen 2). These straight and S-Bend extensions are designed to be cut to length and have internal routing for standard or Di2 cables. - Designed specifically for 2014 Speed Concept - OCLV Carbon fiber mono extensions - Straight and S-Bend extensions are designed to be cut to length - Internally-routed for Di2 and standard cables - Designed to accept 22.2mm standard extensions
Wheels Manufacturing Inc. Chainstay Protector - Wide
$6.25
Wheels Manufacturing Wide Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay. Wide design offers extra coverage for larger chainstays.
3T Ski-Bend Extensions Team
3T's Ski-Bend Aero Extensions are made of light, stiff carbon and feature large ergonomic bends to keep your wrists comfortable and ensure a sturdy grip during your time against the clock. - Standard 22.2-mm diameter - 305mm maximum extension from center line of bar clamp
Delta Threadless To Quill Stem Adapter
- Allows use of a 1-1/8" threadless stem in combination with a threaded headset/steerer - Includes removable shim to fit 1" or 1-1/8" steerer - Cold-forged aluminum with steel bolt
Shimano Dura-Ace Di2 Electronic Front Wiring Kit (for use w/o Flight Deck Computer)
Shimano's Dura-Ace Di2 takes shifting to the next level. The Front Wiring Kit connects to both the left and right shifters and includes the Junction Box A (which displays battery power and allows manual adjusting). It's for use without the Flight Deck Computer.
Cane Creek Thudbuster Short-Travel Elastomer
Replacement elastomers let you tune the suspension on your Cane Creek Thudbuster short-travel seatpost. Available in various models, ranging from extra soft to extra firm.
Sunlite Derailleur Hanger
$3.99 - $19.99
- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact
Sunlite Steel Seat Quick Release
$6.99
• Quick-release seatpost clamp • Chrome-plated chromoly • Rubber-covered handle for a great grip
Sunlite Steel Seat Clamp
$4.99
• With bolt & nut • 1 1/8-inch = 28.6mm • 1-inch = 25.4mm
Sunlite Handlebar Shims
$4.99 - $5.99
- Alloy construction - Great for Cruiser or BMX bar conversions
Sunlite 1-3/8-inch Outer Diameter Cartridge Bearings
$3.99
- Cartridge Bearing - 1-3/8-inch Outer Diameter
Sunlite Alloy Seatpost Shims
$7.99
• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts
Shimano Dura-Ace 9001 STI Lever Name Plate and Fixing Screws
$12.00
Get your scratched Shimano Dura-Ace shifters looking new again with these replacement name plates. They're perfect for sprucing up a well-used bike or erasing the marks of a crash.
Problem Solvers Seatpost Shims
$9.99
Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims. -100mm long -3mm lip -Alloy Problem Solvers Seatpost Shims are not intended for use with carbon seatposts
Enduro Wiper And Seal Kits
$23.00 - $29.00
- Blue polyurethane upgrade dust wipers and oil seals - Dual lip offers improved seal with lower stiction - Fox 32mm and 36mm kits include wipers, oil seals, crush washers, and foam rings - Fox 40mm kits include wipers and seals
Bontrager Blendr XXX Stem Bases
$14.99 - $19.99
Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with Bontrager XXX Blendr stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look
Bontrager Jagwire Downtube Barrel Adjuster (Pair)
$6.50
• For use with externally routed road frames
Odyssey Gyro G3 Lower Cables
$7.99 - $9.99
- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.
Wheels Manufacturing Inc. 7sp Cassette/8sp Body Spacer
- Allows the use of a 7 speed shimano cassette on an 8 or 9 speed shimano cassette body
Electra Townie Quick-Release Seatpost Collar
$9.99 - $15.99
Electra's Townie Quick-Release Seatpost Collar offers a little extra bling and convenience to your Townie bike because it allows no-tools seat-height adjustment. This quality metal clamp is easy to install and use and it securely fastens your seatpost in place.
Wheels Manufacturing Inc. Derailleur Hanger 156
$35.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws Note: Not compatible with 2012 Cervelo models
MRP XCg Guard
$64.95
Utilizing MRP's patented integrated skid, the XCg tucks neatly behind your crankset and protects those costly chainrings from damage. The replaceable nylon skid glides over rocks and obstacles. - Two sizes, 32t and 36t - Great accessory to protect costly chainrings - Integrated skid protects chainrings and glides over rocks and obstacles - 88g (XCg V2 32t, ISCG-05 model)
Wheels Manufacturing Inc. Derailleur Hanger 17
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws Note: Wheels Mfg DROPOUT-17 measures 15.49mm between the 2 mounting holes (center to center) and 4.7mm between the 2 vertical plates.
Page 1 of 9 Next page