Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

SRAM AXS RockShox Seatpost Controller
$199.99
The RockShox AXS controller ushers in the next generation of a clean cockpit with a completely cable-free design. With the touch of a button, operate the new Reverb AXS seatpost with less effort than ever before. Open up all the possibilities with AXS. - AXS app lets you customize configurations, monitor battery levels, update firmware and much more for all RockShox and SRAM AXS enabled components - Compatible with Matchmaker X - System is completely water and dust proof to IP69K
Sun Bicycles Coaster Conversion Kit, 3-Speed
$159.99
Three-Speed Sturmey Archer Coaster Brake Trike Conversion Kit - 21T Front Drive Cog - 22T Rear Transfer Cog - 24T Axle Drive Cog - Cable stop required when installing on Sun Atlas Industrial Cargo Trike
Shimano Di2 Battery Charger
$101.99 - $133.99
Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.
Shimano Short Battery Mount External/Internal Wiring
$118.99
Shimano Di2 External Battery Mount - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
Wheels Manufacturing Inc. Retainer Bearing Kit
$109.99
- Includes stock replacement retainers for headsets, bottom brackets and hubs - Headsets: (8) 5/32"x22, (8) 5/32"x16, (8) 3/16"x15, (24) 5/32"x20; - Bottom brackets: (12) 1/4"x9, (16) 5/16"x9, (16) 5/16"x10 - Hubs: (8) 3/16"x7, (16) 1/4"x7
Jagwire 5G Tube Tops
$10.99 - $99.99
Jagwire Tube Tops cover housing or hydraulic hose to protect a frame’s finish from scratches and keep noise to a minimum. - 5G Tube Tops snap on at any time.
RockShox Remote Upgrade Kit for Reverb
$97.99
This 1X-style remote for installation on the left side provides improved dropper actuation for your Reverb seatpost. Includes: - Remote - Bleeding edge fitting - Discrete clamp - MMX clamp
RockShox Reverb B1 400-Hour or 2-Year Service Kit
$78.99
This kit contains all the parts needed for scheduled maintenance and/or rebuild of B1 non-Stealth Reverb Seatposts. - Includes Blue 1-Piece U-Cup Seal Internal Floating Piston (IFP) - Rebuilds IFP, Poppet, Seal Head, Dust Seal, Piston, Brass Keys, and Bushing - Requires RockShox Specialty Tools to perform Service: Post Bleed Tool, Oil Height Tool, IFP Height Tool - B1 posts have a black return speed adjuster on the remote and "ROCKSHOX" laser-etched logos on stanchion by the saddle cradle
Wheels Manufacturing Inc. 4, 5, 6mm Stainless Steel Fastener Kit
$77.25
- 4, 5, & 6mm stainless steel fastener kit - Includes socket cap screws, flat socket cap screws, flat washers, lockwashers, plain nuts, and locking nuts - 218 Pieces Kit contains: - M4 X 8 Socket Head Cap qty. 8 - M4 X 16 Socket Head Cap qty. 8 - M4 X 8 Flat Socket Head Cap qty. 4 - M5 X 12 Socket Head Cap qty. 12 - M5 X 10 Socket Head Cap qty. 12 - M5 x 8 Socket Head Cap qty. 12 - M5 X 16 Socket Head Cap qty. 8 - M5 X 16 Button Socket Head qty. 16 - M5 X 25 Socket Head Cap qty. 4 - M5 X 8 Flat Socket Head Cap qty. 4 - M5 X 12 Flat Socket Head Cap qty. 8 - M5 X 16 Flat Socket Head Cap qty. 8 - M6 X 20 Socket Head Cap qty. 2 - M6 X 35 Socket Head Cap qty. 2 - M6 X 45 Socket Head Cap qty. 2 - M4 Flat Washer qty. 8 - M5 Hex Nut qty. 20 - M5 Nylock Nut qty. 10 - M5 Flat Washer qty. 20 - M5 Lockwasher qty. 20 - M6 Hex Nut qty. 8 - M6 Nylock Hex Nut qty. 6 - M6 Flat Washer qty. 8 - M6 Lockwasher qty. 8
Wolf Tooth Components ReMote Dropper Post Lever
$64.99 - $69.95
The Wolf Tooth ReMote is a significant lever upgrade for cable-actuated dropper seatposts. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote solves many of the functional problems that come with other dropper lever designs. - Includes barrel adjuster for on-the-fly changes - Lever pivots on a 21mm ball bearing for smooth operation - Engineered break-away pivot that allows the lever to break away from the mount in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Integrates with SRAM/Avid MatchMaker X clamp-equipped brake levers for better ergonomics
RockShox Reverb Full Service Kit, A2, 2013-2016
$65.87
RockShox Reverb Full Service Kit for A2 generation Reverb dropper seatposts - Includes Blue 1-Piece U-Cup Seal Internal Floating Piston (IFP) - Rebuilds IFP, Poppet, Seal Head, Dust Seal, Piston, Brass Keys, and Bushing - For "A2" designated posts, 2013-2016 Includes new Internal Floating Piston (IFP) - Requires RockShox Reverb Rebuild Tools: Post Bleed Tool, Oil Height Tool, IFP Height Tool - For "A2" designated posts, 2013-2016 - A2 posts have a black return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle - Updated service kit as of 06/2016
RockShox Reverb Stealth Full Service Kit, A2 2013-2016
$65.87
RockShox Reverb Stealth Full Service Kit for A2 generation Reverb Stealth dropper seatposts - Includes Blue 1-Piece U-Cup Seal Internal Floating Piston (IFP) - Rebuilds IFP, Poppet, Seal Head, Dust Seal, Piston, Brass Keys, and Bushing - For "A2" designated posts, 2013-2016 Includes new Internal Floating Piston (IFP) - Requires RockShox Reverb Rebuild Tools: Post Bleed Tool, Oil Height Tool, IFP Height Tool - For "A2" designated posts, 2013-2016 - A2 posts have a black return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle - Updated service kit as of 06/2016
RockShox Maxle Stealth Front Thru-Axle
$24.99 - $59.99
The Maxle Stealth offers a light, low profile, tooled alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench
Jagwire Sport Brake Housing
$27.99 - $56.99
Sport brake housing packs high performance features into a colorful and durable package, making it a functional and aesthetic upgrade. - Slick-Lube lined housing reduces friction for faster cable movement and better braking response - High carbon internal steel coil for improved stiffness - Appropriate for Teflon coated cables as well as steel and galvanized
Problem Solvers BB30/Press-Fit 30 Adapter Kit
$55.55
The Problem Solvers BB30/Press-Fit 30 Adapter Kit consists of DuPont Delrin (a tough, light type of plastic) pieces that allow you to use your external bottom bracket-style crankarms (24mm spindles, such as a Shimano Hollowtech II crank) with newer BB30 and Press-Fit 30 bottom brackets. Please contact us if you have any questions about compatibility.
Shimano Ultegra 6800 Outer Chainring Bolt and Cap
$51.00
Shimano Chainring Bolts - For use with FC-6800 46t outer chainring - Color: Black - Length: 10 mm - Material: Aluminum - Type: Torx
Bontrager Speed Concept Seatpost Cap
$49.99
Bontrager's Speed Concept Seatpost Cap lets you get your position dialed for your next triathlon or time trial. Two different saddle offsets and widely a adjustable saddle angle means you'll find the perfect fit for your race against the clock.
Cane Creek Hellbender Headset Bearing
$24.00 - $49.99
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.
Cane Creek Slamset Headset Top
$49.00
Slamset top headsets are designed to keep the stack height low. - Hellbender bearings with improved seal structure
Wheels Manufacturing Inc. Derailleur Hanger 15
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M8 Chainring Bolts
Wheels Manufacturing Inc. Derailleur Hanger 159
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 22
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M4x10 Flat Head Screw Note: This hanger has a pin machined in to it that inserts in to the frame (refer to photos).
Wheels Manufacturing Inc. Derailleur Hanger 230
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. Derailleur Hanger 232
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. Derailleur Hanger 46
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 55
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 8
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt Note: Same hanger as Wheels Mfg DROPOUT-6.
Wheels Manufacturing Inc. BB30 ABEC-3 Bearings & Clip Kit
$45.00
BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings
Wheels Manufacturing Inc. BB30 Angular Contact Bearing & Clip Kit
$45.00
BB30 service kit includes (2) Enduro 6806 ABEC-5 Angular Contact sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems
RockShox 2017 Reverb / Reverb Stealth 200 Hour / 1 Year Service Kit B1
$44.96
RockShox Reverb Service Kit includes foam ring, inner seal head bushing and O-rings
SRAM X-Sync Pulley Assembly
$44.00
Original equipment rear derailleur pulleys for SRAM rear derailleurs. Fits X01, X01DH, X1, GX 1x11, NX, Force CX1, Force 1, Rival 1, Apex 1 Derailleurs. - Wide-narrow pulley tooth profile holds the chain better - Stainless steel sealed cartridge bearings
Wheels Manufacturing Inc. Angled Spacer Single Speed Conversion Kit
$40.00
Wheels Manufacturing Angled Spacer Single Speed Conversion Kit is a Shimano- and SRAM-compatible single speed conversion kit with ramped spacers. Additional spacers are included to dial-in chainline. Includes: - (2) - 9mm angled spacers - (6) - 3mm spacers - (2) - 1mm shims - (1) - lockring - (1) - 16t cog Compatible with: - Any 1/2 x 1/8 pitch chain, this includes BMX and Track chains - Any 8 or 9-speed chain * Does not work acceptably with 10 or 11-speed chains
Wheels Manufacturing Inc. Derailleur Hanger 233
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. Derailleur Hanger 305
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M5x10 Socket Head Screw Included - For 12x1.5 MAXLE - Replaces Pivot Part #018 (FP-RDH-TA-12MM-BLK-V3)
Wheels Manufacturing Inc. Derailleur Hanger 314
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - For 148 Thru Axle Frames - Replaces Santa Cruz Part #04-17052
Wheels Manufacturing Inc. Derailleur Hanger 360
$40.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Norco Part #913015-001-2 - For use with M12x1.75 MAXLE Thru Axles - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. Derailleur Hanger 361
$40.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Norco Part #913015-001-1 - For use with M12x1.0 Thru Axles - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. Derailleur Hanger 365
$40.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Scott Part #254093-222 - For Shimano Direct Mount derailleurs - M12x1.0 Thru Axle - Attaches to frame with (1) special M5 flat head screw (sold separately) - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. Derailleur Hanger 368
$40.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Santa Cruz Part #23-18684 - Fits Santa Cruz frames with 12 x 148mm thru axles only - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. Derailleur Hanger 371
$40.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Scott Part #254091-222 - For Shimano Direct Mount derailleurs - CNC machined 6061 aluminum - Black anodized finish - Attaches to frame with (1) special M4 socket head screw (sold separately)
Wheels Manufacturing Inc. Derailleur Hanger 374
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in Colorado to exacting tolerances. - Dropout-374 is the direct mount version of dropout-284 - Replaces specialized part # S182600003 - For use with Shimano direct mount rear derailleurs - CNC machined 6061 aluminum - Black anodized finish - Attaches to frame with (1) M5x10 socket head screw (fastener not included)
Delta Stem Raiser
$39.99
- Clamps to a threadless steerer - Offers up to 4-1/2" stem height increase - Forged 6061-aluminum provides extra strength - Machined aluminum top cap is threaded, providing easy installation
Electra Delivery 3i Wood Tank Plate
$39.99
Make sure your bike is looking fresh with Electra's Delivery 3i Wood Tank Plate. The clear polish accentuates the natural wood grain and protects it from weather so your tank plate looks great for years!
Race Face Aeffect Dropper 1x Lever
$39.99
- Ergonomic 1x lever - Compatible with the Turbine and Aeffect Dropper Posts - Standard shifter cable and housing
Wheels Manufacturing Inc. Enduro 6806 ABEC-3 Sealed Bearings, Bag of 2
$39.99
Enduro 6806 ABEC-3 Sealed Bearing. Direct replacement bearing for most BB30/PF30 OEM bottom brackets as well as all Wheels Mfg bottom brackets for 30mm spindle cranks. - Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - ABEC-3 - Grade 10, 5/32" chromium steel balls - Kyodo Yushi SRL grease or equivalent - Enduro Part # BB 6806 LLB/C3 - Imported - Sold Bag of 2
SRAM Stealthamajig Hydraulic Disc Brake Hose Fitting Kit
$38.99
Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes
Problem Solvers Chain Tensioner with Hanger
$37.20
The Problem Solvers Chain Tensioner is a handy device that lets you cleanly install a derailleur on frames without a derailleur hanger. It's made of light and durable CNC-machined 6061 aluminum with steel hardware. It's designed for use with rear-facing horizontal dropouts and 10mm rear axles.
SRAM eTap Lever Hood Covers
$37.00
Replacement hoods for SRAM hydraulic shifter/brake levers.
Wheels Manufacturing Inc. Derailleur Hanger 309
$36.10
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Attaches to frame with special M4x14 Torx Flat Head Screw - Fastener not Included - For use with 142x12 or wider Thru Axle Hubs - Replaces Scott Part #219574 and 219577 Note: this hanger is for use with 142x12, 148x12, or 197x12 rear hubs.
Shimano Dura-Ace R9100 Rear Derailleur Pulley Set
$35.00
Get that nice derailleur shifting smoothly and operating silently again with a Shimano Rear Derailleur Pulley Set. - OEM pulley set for Dura-Ace R9100 - Sealed bearing guide & tension pulley - Guide pulley with extra long teeth for increased chain control
Wheels Manufacturing Inc. Derailleur Hanger 156
$35.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws Note: Not compatible with 2012 Cervelo models
Wheels Manufacturing Inc. Derailleur Hanger 162
$35.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Screws
RockShox Maxle Stealth Rear Thru-Axle
$29.99 - $34.99
Rockshox Maxle Stealth is a light, low profile alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench
Wheels Manufacturing Inc. Derailleur Hanger 1
$32.00
This ingenious device allows you to get back home should you break your hanger out on the road or trail. Simply remove your broken hanger, derailleur and QR skewer nut. Put the QR skewer through the Emergency Hanger, remove the spring and re-attach the nut. Secure the QR nut and skewer down tightly. Re-attach the derailleur and away you go! In most cases you should have the ability to shift throughout half (or more!) of your rear cassette range. Sorry, this hanger is designed as a quick, Emergency fix to get you back home and is not designed for long term use. - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. Derailleur Hanger 12
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws
Wheels Manufacturing Inc. Derailleur Hanger 120
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws Note: The mounting holes on Wheels Mfg DROPOUT-120 are 18mm apart, center-to-center. Do not confuse this hanger with DROPOUT-138.
Wheels Manufacturing Inc. Derailleur Hanger 138
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws Note: The mounting holes on Wheels Mfg DROPOUT-138 are 23mm apart, center-to-center. Do not confuse this hanger with Wheels Mfg DROPOUT-120.
Wheels Manufacturing Inc. Derailleur Hanger 154
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 163
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws
Page 1 of 5 Next page